2.2 Concrete, Stone, or Masonry Installation Step 4: Fix the Wall plate to the wall with M7x55mm Lag bolts. Step 3: Pre-drill 3 holes by 5/32” ( 4mm ) wood drill bit to a depth of 2.36” ( 60mm ) Step 2: Place the hanging template at the center of the stud line and mark 3 holes using a pencil. If you have concrete, stone, and masonry walls then you can check 2.2 Concrete, Stone or Masonry Installation. This will ensure that your TV is securely anchored and won’t fall off the wall. Step 1: Once you decide the best place for your tv then use a stud finder to locate the studs inside the walls. The Wood stud minimum size is 2×4’’, and the surface covering can’t be more than 5/8″. Warning: don’t use a 10×50 mm Anchor for wood stud installation These parts are already included in the box and in the plastic bag, if you are not able to identify then you can also use the manual (Inside the box).Ī mounting template is also included in the package. But you may need to assemble the TV bracket before attaching it to the screen. The wall plate will be already assembled. It could depend on room layout, viewing angle, and available space. Step 1: Determine TV Placementīefore installation, First, you need to determine where you want to place your tv. So Onn provides all the necessary parts that you need to hang the wall mount. The Onn Wall mount box already contained the mount and the mounting screws with their own washers, an Allen key, and anchors. Stud finder ( only if you have drywall).The installation process for both wall mounts is the same, so by following these instructions you can hang both onn tv mount.īefore we go ahead, here are some materials that you may need while hanging the mount on the walls. If you click on a link and make a purchase, I may receive a commission at no additional cost to you.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |